obradni-centar-vmc-650 | cnc-glodalice | glodalice

Obradni centar VMC-650

Veliki hodovi i veliki radni sto omogućavaju Vam da prihvatite kompleksne poslove. Broj obrtaja glavnog vretena 100-8000 obr./min i snaga od 7,5 kw garantuju Vam kvalitetnu obradu. Namenjena alatnici,serijskoj proizvodnji,prototipu. Kontroler Siemens 808D , opciono 828D .Namenjena serijskoj proizvodnji, alatnici, prototipu. Stabilno liveno kućište, precizna kuglična vučna vretena, jaki motori posmaka pružaju vam uverenje u uspešnost vaših poslova.

HIWIN kuglična vretena (Ball screw) na svim osama
Odliveno postolje, X i Y vođice kuglične profilne Hiwin, opciono Z
Glavno vreteno se obrće 100-8000 obr./min , sa snagom od 7,5 kw
Siemens Sinumeric 808D kontroler, opciono 828D
Magacin sa 10 alata, opciono sa 16 alata

Siemens Sinamics drajver servo motora
SINAMICS S120

Siemens Simotics servo motori
SIMOTICS S 1FK7 feed motors

Tehničke karakteristike

Vertikalni obradni centar	VMC-650
Tehnički podaci
Max. nošenje stola	300 kg
Dimenzije radnog stola	920x330 mm
T-žljeb	3x14x100 mm
Hod X-osa	650 mm
Hod Y-osa	400 mm
Hod Z-osa	500 mm
Brzina ver. glave	100-8000 o/min
Brzi posmak	24000 mm/min
Brzina posmaka	1-15000 mm/min
Tačnost pozicioniranja	± 0,006 mm
Tačnost repozicioniranja	± 0,004 mm
Priključak	ISO40, alati BT40
Rast. od vretena do stola	100 - 600 mm
Rast. od vretena do stuba	445 mm
Tačnost pozicioniranja	± 0.012 mm
Tačnost	± 0.005 mm
Motor glavnog vretena	7,5/11 kW
Motor sistema za hlađenje	0.04 kW
Snaga/Napon	15KVA, 3x380V
Dimenzije mm	2110x2040x2050 mm
Težina	3000/3500 kg

SINUMERIK 808D ADVANCED

Standardna oprema

Obradni centar standardno posedije Sinumerik 808D kontrolnu jedinicu , sa kompletnim Siemensovim sistemom motora i drajvera ( može kontrolisati do 4 ose). Za zahtevnije korisnike, na raspolaganju je 828D kontrolna jedinica.
sinumerik 8508d 03

Standardna oprema

Zaštitna kabina
ATC uređaj sa magacinom za 10 alata
Centralni sistem za podmazivanje
Alat i uputstvo za programiranje

Opciona oprema

Kuglične vođice ne Z osi
ATC uređaj sa magacinom za 16 alata
Obradni motor sa 10.000 obr/min, 11 kw
Uređaj za 4-tu osu

Sinumerik 808D

Potrebnu literaturu za upoznavanje sa Sinumerik 808D sistemom za glodanje, možete preuzeti na sledećoj stranici

G code	Description
G00	Rapid traverse
G01	Linear movement
G02	Circle/helix in clockwise direction
G03	Circle/helix in the counterclockwise direction
G04	Dwell time in [s] or spindle revolutions
G05	High-speed cycle cutting
G05.1	High-speed cycle -> Call CYCLE305
G08	Pre-control ON/OFFG15 Polar coordinates off
G09	Exact stop
G10	Write work offset/tool offset
G10.6	Retraction from contour (POLF)
G11	End parameter entry
G16	Polar coordinates on
G17	XY plane
G18	ZX plane
G19	YZ plane
G20	Inch input system
G21	Metric input system
G27	Checking the reference position
G28	1. Approaching a reference point
G30	2./3./4. Approaching a reference point
G30.1	Reference point position
G31	Measuring with “delete distance-to-go”
G40	Deselection of cutter radius compensation
G41	Compensation left of contour
G42	Compensation to right of contour
G43	Positive tool length compensation on
G44	Negative tool length compensation on
G49	Tool length compensation off
G50	Scaling off
G51	Scaling on
G50.1	Mirroring on programmed axis OFF
G51.1	Mirroring on programmed axis ON
G52	programmable work offset
G53	Approach position in machine coordinate system
G54 P0	external work offset
G54	Selecting work offset
G55	Selecting work offset
G56	Selecting work offset
G57	Selecting work offset
G58	Selecting work offset
G59	Selecting work offset
G60	directed positioning
G61	Exact stop modal
G63	Tapping mode
G64	Continuous-path modeG66 Macro module call
G65	Macro call
G67	Delete macro module call
G68	Rotation ON, 2D/3D
G69	Rotation OFF
G72.1	Contour repetition with rotation
G72.2	Linear contour repetition
G73	High-speed deep hole drilling cycle with chip breakage
G74	Left tapping cycle
G76	Fine drill cycle
G80	Cycle off
G81	Drilling cycle counterboring
G82	Countersink drilling cycle
G83	Deep hole drilling cycle with chip removal
G84	Right tapping cycle
G85	Boring cycle, retraction with G01 after reaching the end in axis Z, without spindle stop
G86	Boring cycle, spindle stops and then retraction with G00 after reaching the end in axis Z
G87	Reverse countersinking
G89	Boring cycle, stay for a while and then retraction with G01, without spindle rotation direction change
G90	Absolute programming
G91	Incremental programming
G92	Setting actual value
G92.1	Delete actual value, reset the WKS
G93	inverse-time feedrate (1/min)
G94	Feedrate in [mm/min, inch/min]
G95	Revolutional feedrate in [mm/rev, inch/rev]
G96	constant cutting rate on
G97	constant cutting rate off
G98	Return to starting point in fixed cycles
G99	Return to point R in fixed cycles
G290	Selection of Siemens mode
G291	Selection of ISO dialect mode