|
Lathe D2260
|
|
Wednesday, 07 July 2004 12:54 |
 |
 |
 |
|
|
Ø560 x 1500mm. Power, masive and precise.High-quality lead screw and feed shaft lathe for masive production,repair work, tool shop,training. What makes lathe D2260 so special?
- Cost-effective, lasting value
- Practically arranged control panel with ergonomic layout of selection levers
- Camlock spindle mount D1-6
- Wide bed, hardened and ground guideways
- Offset tailstock (± 13mm) for taper turning
- Removable gap bridge for large diameter machining
- Large number of thread leads
- Stop spindle with adjustable travel stops
- Central system of lubrication
- Emergency-Stop ,Siemens® electric
- Chuck protection, leadscrew protection, according to CE standard
- Halogen work lamp, cooling system ,tools,instruction manual
| Lathe |
D2260 |
D2260DRO |
| Working dimension |
560 x 2000mm |
560 x 2000mm |
| Price € (Exclude-tax) |
11.100,- |
11.600,- |
| Technical data |
| Center height |
280 mm |
280 mm |
| Center width |
1500 mm |
1500 mm |
| Max.turn.diam.over bed |
560 mm |
560 mm |
| Max.turn.diam.over suport |
365 mm |
365 mm |
| Max.turn.diam.over bridge |
785 mm |
785 mm |
| Bridge length |
350 mm |
350 mm |
| Spindle bore |
80 mm |
80 mm |
| Spindle mount |
Camlock D 1-8“ |
Camlock D 1-8“ |
| Spindle taper |
MT 7 |
MT 7 |
| Spindle speed, 12 steps |
25 - 1600 rpm |
25 - 1600 rpm |
| Taping-Metric(47) |
0.2 - 14 mm/rev |
0.2 - 14 mm/rev |
| Taping-Whitworth(60) |
2 - 112 TPI |
2 - 112 TPI |
| Taping-Module(39) |
0,1-7 |
0,1-7 |
| Taping-Diametrics (50) |
4 - 112 D.P. |
4 - 112 D.P. |
| Logitudinal feeds(40) |
0.059-1.64mm/r |
0.031-1.7mm/r |
| Transverse feeds(40) |
0.02-0.57mm/r |
0.014-0.78mm/r |
| Max. top-slide travel |
130 mm |
130 mm |
| Max.cross-slide travel |
316 mm |
316 mm |
| Tailstock quill taper/diam. |
MT 5 |
MT 5 |
| Tailstock quill stroke |
180 mm |
180 mm |
| Motor rating/voltage |
7,5kW,400 V/~50Hz |
7,5kW,400V/~50Hz |
| Dimension(LxWxH)mm |
2840x1080x1370 |
2840x1080x1370 |
| Weight |
2020/2385kg |
2020/2385 kg |
Standard accessoriess:
- 3-jaw chuck Ø315mm
- 4-jaw chuck(independant) Ø350mm
- Face plate Ø450mm
- Follow rest
- Steady rest
- Centres MT7, change-gears
- Foot brake, coolant system, chip tray,halogen work lamp
- Toolbox with operating tools
- Chuck guard, leadscrew guard, tool guard
|
2011-06-05 
3.65 MB 
1
